Replacing A BT Homehub 5 [BETTER]
LINK >>> https://byltly.com/2thvYn
root@homehub:# /etc/init.d/dsl_control statusATU-C Vendor ID: Broadcom 178.30ATU-C System Vendor ID: BroadcomChipset: Lantiq-VRX200Firmware Version: 5.7.6.10.0.7API Version: 4.17.18.6XTSE Capabilities: 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x2Annex: BLine Mode: G.993.5 (VDSL2 with down- and upstream vectoring)Profile: 17aLine State: UP [0x801: showtime_tc_sync]Forward Error Correction Seconds (FECS): Near: 0 / Far: 2Errored seconds (ES): Near: 0 / Far: 3Severely Errored Seconds (SES): Near: 0 / Far: 0Loss of Signal Seconds (LOSS): Near: 0 / Far: 0Unavailable Seconds (UAS): Near: 99 / Far: 99Header Error Code Errors (HEC): Near: 0 / Far: 0Non Pre-emtive CRC errors (CRC_P): Near: 0 / Far: 0Pre-emtive CRC errors (CRCP_P): Near: 0 / Far: 0Power Management Mode: L0 - SynchronizedLatency [Interleave Delay]: 0.15 ms [Fast] 0.0 ms [Fast]Data Rate: Down: 60.839 Mb/s / Up: 23.120 Mb/sLine Attenuation (LATN): Down: 8.3 dB / Up: 6.4 dBSignal Attenuation (SATN): Down: 8.4 dB / Up: 6.3 dBNoise Margin (SNR): Down: 5.0 dB / Up: 6.4 dBAggregate Transmit Power (ACTATP): Down: -5.6 dB / Up: 12.5 dBMax. Attainable Data Rate (ATTNDR): Down: 64.368 Mb/s / Up: 33.830 Mb/sLine Uptime Seconds: 1819Line Uptime: 30m 19s
{ \"model\": { \"id\": \"BTHOMEHUBV5A\", \"name\": \"BT Home Hub 5A\" }, \"led\": { \"wifi\": { \"name\": \"wifi\", \"type\": \"trigger\", \"sysfs\": \"bthomehubv5a:blue:wireless\", \"trigger\": \"phy0tpt\" }, \"internet\": { \"name\": \"internet\", \"type\": \"netdev\", \"sysfs\": \"bthomehubv5a:blue:broadband\", \"device\": \"nas0\", \"mode\": \"link tx rx\" }, \"dimmed\": { \"name\": \"dimmed\", \"sysfs\": \"dimmed\", \"default\": \"0\" } }, \"switch\": { \"switch0\": { \"enable\": true, \"reset\": true, \"ports\": [ { \"num\": 0, \"role\": \"lan\", \"index\": 3 }, { \"num\": 1, \"role\": \"lan\", \"index\": 4 }, { \"num\": 2, \"role\": \"lan\", \"index\": 2 }, { \"num\": 4, \"role\": \"lan\", \"index\": 1 }, { \"num\": 5, \"role\": \"wan\", \"index\": 5 }, { \"num\": 6, \"device\": \"eth0\", \"need_tag\": true } ], \"roles\": [ { \"role\": \"lan\", \"ports\": \"0 1 2 4 6t\", \"device\": \"eth0.1\" } { \"role\": \"wan\", \"ports\": \"5 6t\", \"device\": \"eth1.2\" } ] } }, \"network\": { \"lan\": { \"ifname\": \"eth0.1\", \"protocol\": \"static\", \"macaddr\": \"18:62:2c:XX:XX:XX\" }, \"wan\": { \"ifname\": \"eth1.2\", \"protocol\": \"dhcp\", \"macaddr\": } }}
since the laptop and iPhone found the base etc I didn't even consider it being the router but after googling Arlo and BT homehub 3 it's apparent this looks the main culprit as I few have mentioned the lack of video streaming.
Major modernisation includes a smartcard ticketing system linked to wider integrated ticketing; new rolling stock and signalling; refurbished stations with improved accessibility including replacing escalators.
By replacing an old and unfit prison, HMP Glasgow will provide a fit-for-purpose prison which supports the government's objective of reducing the risk of prisoners reoffending on release from custody.
By replacing an old and unfit prison, HMP Highland will provide a fit-for-purpose prison which supports the government's objective of reducing the risk of prisoners reoffending on release from custody. 153554b96e
https://www.rapveterans.com/group/the-forum/discussion/d8768129-616a-495c-8f2e-35cc2cda636a
https://www.valuwash.com/forum/general-discussions/argumentative-essay-writing-exercises